Call Us : 207-994-5109
Mon – Fri: 8 am to 9 pm & Sat – Sun: 10 am to 8 pm
Call Us : 207-994-5109
Mon – Fri: 8 am to 9 pm & Sat – Sun: 10 am to 8 pm
The Bennington 24 SX is the large lounge-focused SX for buyers who care about adult seating, stern lounging, and all-day cruising more than a dedicated fishing station.
The 24 SX is the large lounge-focused SX for buyers who care about adult seating, stern lounging, and all-day cruising more than a dedicated fishing station. With the 24 SX, that is the reason to start here rather than treating it as another number in Bennington’s S Series.
The current 24 SX menu is notably lounge-focused. Quad Bench, Swingback, Stern Lounge, and L-Bench arrangements dominate, with some floorplans extending overall length to approximately 26 feet 3 inches. It is a large social pontoon rather than a fish-first size in the current catalog.
The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label. When evaluating the 24 SX, the detail matters because the same nominal length can hide a different deck mission or a different real overall length.
The 24 SX is not sold as one immutable chassis. On the 24 SX, tube choice, performance package, outboard, and options can change carrying ability and performance. Buyers should therefore shop the complete build, not copy a specification from another 24 SX listing.
The 24 SX uses single-outboard power, but SX buyers should select the performance package before treating horsepower as a shopping filter. For the 24 SX, Bennington’s SPS system is designed around three full-length 25-inch tubes with lifting strakes and hydraulic steering, while Express is intended for lighter engines and adds a partial center tube. A 24 SX listing with more horsepower is not automatically the better boat if its layout or chassis is wrong for the crew.
The honest drawback is straightforward. The 24 SX gives up some of the fishing variety found at 21, 22, and 23 feet. Buyers who want bass seats and livewells should not assume every SX size offers the same fish catalog.
If that drawback already sounds frustrating, compare the 23 SX or 25 SX before price takes over the decision. With the 24 SX, a payment advantage cannot fix a deck plan or ownership footprint that is wrong every weekend.
Published factory figures. Confirm every dimension against the individual boat before you commit.
The 24 SX is a pontoon or tritoon platform, so applying a fiberglass V-hull deadrise number would be wrong. For the 24 SX, Bennington does not publish one maximum draft, weight, or capacity that safely describes every configuration in this model family.
Current 24 SX Quad Bench and L-Bench boats are near 24 feet 11.5 inches, while Swingback and Stern Lounge layouts can extend to about 26 feet 3 inches. The suffix can therefore add more than a foot to the real boat.
On the 24 SX, tube choice is the closest equivalent to choosing a hull package. For the 24 SX, a twin-tube build keeps the structure simple. For the 24 SX, Express adds a partial center tube for more support with moderate horsepower. On the 24 SX, SPS uses three full-length 25-inch tubes with lifting strakes, performance foils, an underdeck wave shield, and hydraulic steering.
With the 24 SX, inspect aluminum structure differently from fiberglass. For the 24 SX, look for deep dents, changed welds, damaged strakes, corrosion, electrolysis, or scars from an unsuitable lift. On the 24 SX, the underdeck crossmembers and wave shield, if fitted, should be straight and securely attached.
For the 24 SX, the published LOA is the number that should drive dock planning. The 24 SX’s model badge is a catalog shorthand, while Approximately 24’11.5″ to 26’3″ by current floorplan is the more useful current reference.
Configuration: Single outboard; engine brand and output vary by the selected performance package
Maximum Horsepower: Varies by configuration; SX Line supports higher-power packages on compatible builds
The 24 SX uses single-outboard power, but SX buyers should select the performance package before treating horsepower as a shopping filter. For the 24 SX, Bennington’s SPS system is designed around three full-length 25-inch tubes with lifting strakes and hydraulic steering, while Express is intended for lighter engines and adds a partial center tube. A 24 SX listing with more horsepower is not automatically the better boat if its layout or chassis is wrong for the crew.
On a 24 SX, a sea trial should use the actual engine and a realistic passenger load. For the 24 SX, pontoons can feel lively with two people and much less eager once the bow benches, coolers, batteries, and watersports gear are occupied.
Performance-package steering deserves separate attention. On the 24 SX, SPS includes SeaStar hydraulic steering, so a sloppy wheel or visible leak on an SPS boat should be corrected rather than dismissed as normal pontoon behavior.
If a used 24 SX has been repowered, confirm that the capacity plate supports the engine and that controls, steering, transom rigging, and gauges were updated correctly. With the 24 SX, a newer outboard only adds value when the installation makes sense for the chassis.
The best engine for the 24 SX is the one that matches the hull underneath it. For the 24 SX, horsepower should finish the configuration decision, not start it.
The 24 SX does not have one safe fuel-capacity figure for every possible build. For the 24 SX, Bennington’s performance packages can use different tank arrangements, and SPS literature notes a 32-gallon transom tank on select models.
That means a buyer should verify the tank on the actual 24 SX rather than assigning a sibling’s number. For the 24 SX, the same rule applies to range. On the 24 SX, engine output, propeller, tube package, load, speed, and water conditions all change consumption.
When shopping the 24 SX, for relaxed cruising, the most economical operating point is normally found after the boat is fully on plane or settled into its efficient cruise attitude. When evaluating the 24 SX, a higher-output tritoon can sometimes run comfortably at lower throttle than an underpowered heavy twin tube.
A used 24 SX should have its fill, vent, hoses, sender, and tank area inspected. When evaluating the 24 SX, fuel smell under the deck or unexplained gauge behavior deserves investigation before delivery.
A 24 SX sea trial should begin with the chassis identified. On the 24 SX, a twin tube, Express boat, and SPS tritoon can share the same furniture but respond differently when accelerating, turning, or carrying weight in the bow.
Load matters. Put adults in the seats they will normally occupy and watch how the 24 SX trims. For the 24 SX, run at the speed your family prefers, then make broad turns and cross ordinary wakes. A 24 SX performance package should solve a real handling need rather than exist only as an expensive line on the build sheet.
For the 24 SX, if towing is important, test acceleration with realistic weight. On the 24 SX, SPS is designed to improve lift and handling through its third tube, strakes, wave shield, and hydraulic steering. A cruising family on the 24 SX may never need that additional hardware.
The current 24 SX menu is notably lounge-focused. Quad Bench, Swingback, Stern Lounge, and L-Bench arrangements dominate, with some floorplans extending overall length to approximately 26 feet 3 inches. It is a large social pontoon rather than a fish-first size in the current catalog.
When shopping the 24 SX, that floorplan choice affects more than where people sit. When evaluating the 24 SX, it determines where bags disappear, where someone boards from a side dock, whether fishing gear has a dedicated station, and how easily passengers can move while someone is using the stern.
For the 24 SX, current equipment also includes this collection context: Twin Stern Lounge availability, Swingback rear lounge, quad-bench seating, L-Bench sun pad storage, Premium Simtex, Deluxe LilliPad ladder. On the 24 SX, confirm which items are standard on the specific model year and which arrived through a trim or option package.
With the 24 SX, walk through every gate with a cooler or tackle bag in hand. A port midship gate, dual aft gates, or a longer port bench can change how naturally the 24 SX works at your dock.
The right 24 SX floorplan should solve the day without furniture gymnastics. For the 24 SX, if you keep imagining passengers moving so someone else can fish or board, another suffix is probably the better boat.
On a 24 SX, rockford Fosgate Audio – Rockford Fosgate audio is part of the SX equipment story and is commonly paired with the line’s social seating layouts.
Current 24 SX layouts use Premium Simtex furniture as a core SX line distinction from the more value-focused S configurations.
Bennington lists the Deluxe LilliPad ladder across current 24 SX floorplans for easier stern boarding from the water.
An extended aft deck is available on current 24 SX layouts, and some floorplans use that architecture to increase published overall length.
The 24 SX family currently spans Quad Bench, Swingback, Stern Lounge, and L-Bench configurations, so buyers need the suffix before comparing two listings.
The 24 SX sits within Bennington's SX line, which pairs an ergonomic helm with upgraded materials and integrated storage rather than treating the size as a bare entry pontoon.
The 24 SX can be paired with compatible Bennington performance packages, so tube count, steering, power rating, and fuel arrangement can change by build.
The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label.
The 24 SX’s systems depend on how it was configured. With the 24 SX, identify the outboard, steering, batteries, displays, audio, lighting, pumps, charging equipment, and any fishing hardware before deciding what needs to be tested.
Used 24 SX boats often collect aftermarket electrical work. For the 24 SX, look for proper fusing, clean terminals, protected wire routing, and secure battery connections. On the 24 SX, an expensive display is not an upgrade if the installation behind it is unreliable.
On fishing versions of the 24 SX, run livewells and inspect trolling-motor circuits. When evaluating the 24 SX, on social layouts, test movable seat hardware, Swingback mechanisms, tables, and gate latches.
Use Approximately 24’11.5″ to 26’3″ by current floorplan as the current length reference for the 24 SX, then confirm the exact floorplan. When evaluating the 24 SX, aft-deck and APG configurations can make a boat longer than the nominal badge suggests.
Bennington does not publish one universal trailer height or storage length for every 24 SX. On the 24 SX, measure the completed rig from coupler to outboard if the boat must fit beside a house or inside a building.
On a 24 SX, trailer owners need the real loaded weight, including engine, trailer, fuel, batteries, options, and stored gear. On the 24 SX, do not turn the generic model-family page into a tow rating.
The 24 SX gives up some of the fishing variety found at 21, 22, and 23 feet. Buyers who want bass seats and livewells should not assume every SX size offers the same fish catalog. For the 24 SX, solve that logistical issue before the payment makes the larger or more complicated boat seem easy.
When shopping the 24 SX, these views should prove the exact layout rather than simply show attractive pontoon photography. For the 24 SX, look for the suffix-specific furniture, tube package, helm, engine, gates, and stern arrangement.
The 24 SX is primarily a large lounge-market purchase in the current catalog. Used buyers should identify Swingback, Stern Lounge, Quad Bench, or L-Bench before comparing price.
With the 24 SX, do not hard-code a market number into body copy when Bennington configurations can move so widely.
For the 24 SX, the first pricing adjustment is the chassis. A twin-tube 24 SX and an SPS tritoon are not equivalent because the latter adds a full center tube, lifting hardware, hydraulic steering, and potentially more allowable power.
The second is the floorplan. The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label. A 24 SX listing with the wrong layout should not be valued as a substitute simply because it is cheaper.
Illustration only and not an offer of credit.
The 24 SX engine, tube package, layout, electronics, and trailer can materially change the price.
Illustration only and not an offer of credit. Your actual rate and term depend on credit profile, vessel age, loan amount and ownership structure.
Cross-shop the Bennington 24 SX with the 23 SX or 25 SX only after identifying the exact SX suffix. The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label. The 24 SX gives up some of the fishing variety found at 21, 22, and 23 feet. Buyers who want bass seats and livewells should not assume every SX size offers the same fish catalog.
With the 24 SX, start with the full floorplan code. The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label. That code tells you far more than the generic 24 SX name about how the deck is arranged.
Identify the tube package next. For the 24 SX, confirm Twin Tube, Express, SPS, or another compatible setup, then photograph the capacity plate so engine and passenger limits are documented.
For the 24 SX, verify the outboard make, model, horsepower, serial number, and hours. When buying the 24 SX, ask for service records and confirm that any repower is appropriate for the chassis.
Inspect the aluminum below deck. For the 24 SX, look at welds, strakes, center-tube hardware, transom structure, and any sign of lift or impact damage.
The 24 SX is primarily a large lounge-market purchase in the current catalog. Used buyers should identify Swingback, Stern Lounge, Quad Bench, or L-Bench before comparing price.
Then compare the 23 SX or 25 SX. The 24 SX gives up some of the fishing variety found at 21, 22, and 23 feet. Buyers who want bass seats and livewells should not assume every SX size offers the same fish catalog. When evaluating the 24 SX, if that alternative fixes the issue without creating a worse one, choose it instead.
On a 24 SX, start your application with the specific details, seller type, model year, floorplan code, engine, and asking price. When evaluating the 24 SX, a Bennington size badge can describe several different boats, so the transaction should be evaluated around the exact build.
The 24 SX price spread is driven by floorplan, model year, outboard, performance package, trim, electronics, and trailer or lift equipment. For the 24 SX, the 24 sx is primarily a large lounge-market purchase in the current catalog. used buyers should identify swingback, stern lounge, quad bench, or l-bench before comparing price.
Bennington currently publishes Approximately 24’11.5″ to 26’3″ by current floorplan for the relevant 24 SX layouts. The exact 24 SX suffix matters because an extended aft deck or APG arrangement can alter LOA. For the 24 SX, use the individual build sheet when sizing a slip, lift, trailer, or storage bay.
The 24 SX does not have one safe collection-wide passenger number on this page. For the 24 SX, Bennington can change capacity with the floorplan and tube package. On the 24 SX, read the capacity plate on the exact boat before treating a dealer’s generic model description as the legal rating.
For the 24 SX, horsepower is configuration-specific. When evaluating the 24 SX, varies by configuration; SX Line supports higher-power packages on compatible builds. The selected 24 SX tubes and transom determine the engine ceiling, so the build sheet and capacity plate outrank a broad S Series maximum.
The better 24 SX chassis depends on use. With the 24 SX, a simpler twin-tube arrangement suits relaxed cruising and lower power. A compatible 24 SX SPS tritoon adds a third full-length tube, lifting hardware, an underdeck wave shield, and hydraulic steering for heavier loads and watersports.
On a used 24 SX, inspect tube dents and weld repairs first, then verify the outboard, steering, electrical additions, furniture, canvas, gates, ladder, and trailer. Pay special attention to the floorplan hardware described here: The 24 SX Stern Lounge and Swingback configurations reach roughly 26 feet 3 inches overall, a storage and slip fact that matters more than the nominal 24-foot label.
A used 24 SX may be financeable depending on model year, value, condition, purchase amount, seller type, and borrower qualifications. Start your application with the actual details because the 24 SX badge can hide meaningful differences in engine and chassis.
The 24 SX is the stronger choice when you want the large lounge-focused SX for buyers who care about adult seating, stern lounging, and all-day cruising more than a dedicated fishing station. The 23 SX or 25 SX deserves the purchase when this limitation matters more: The 24 SX gives up some of the fishing variety found at 21, 22, and 23 feet. Buyers who want bass seats and livewells should not assume every SX size offers the same fish catalog.
Tell us a little bit about yourself and the boat you are looking to finance.
