Call Us : 207-994-5109
Mon – Fri: 8 am to 9 pm & Sat – Sun: 10 am to 8 pm
Call Us : 207-994-5109
Mon – Fri: 8 am to 9 pm & Sat – Sun: 10 am to 8 pm
The Chaparral SSX 6 is the mid-size luxury SSX, adding yacht certification, a 22-degree hull, 12-inch Simrad, Infinity Power Step, freshwater, and a full head.
The Chaparral SSX 6 exists for a specific buyer: families who need 26-foot luxury-bowrider space and real all-day convenience without moving to the 28- or 30-foot ownership burden. The first ssx in this group to add yacht certification, freshwater, a full head, and infinity power step is the reason this page should not read like a generic Chaparral sport-boat article.
The SSX 6 is the first SSX in this group to add yacht certification, freshwater, a full head, and Infinity Power Step.
On the SSX 6, the first decision is not color or stereo. The SSX 6 measures 26′ 5″, carries a 8′ 6″ beam, and publishes 5,300 lbs with engine as its weight reference. With this SSX 6, those numbers determine whether the boat belongs on the family’s existing trailer, lift, or marina plan.
The SSX 6 also publishes 380 HP maximum horsepower and 65 gallons of fuel. For a SSX 6 buyer, those figures describe the power and range envelope, but they do not answer whether the propulsion layout suits how the family swims, fishes, trailers, or services the boat.
SSX 6 is the right middle luxury boat when all-day comfort matters but conventional-width towing and 26-foot scale are still important.
The most important alternative is SSX 4 or SSX 8. Choose SSX 4 when head and freshwater systems are unnecessary. Choose SSX 8 when the family will use the extra hull length, 430 horsepower, 80 gallons of fuel, and larger social deck.
Published factory figures. Confirm every dimension against the individual boat before you commit.
The move to 22 degrees of deadrise and 5,300 pounds published weight makes SSX 6 more substantial than either 24-foot sibling while preserving an 8-foot-6-inch beam.
The SSX 6 uses Chaparral’s Extended V-Plane approach, but the way weight is packaged matters as much as the running-surface name. With the SSX 6 at 26′ 5″ and 8′ 6″ wide, on this sterndrive model, propulsion changes what sits inside the aft hull, how the transom is loaded, and where service access lives.
At 22° of transom deadrise, the SSX 6 should be judged for the water it actually runs. With the SSX 6 at 26′ 5″ and 8′ 6″ wide, the buyer should look for clean tracking, sensible bow rise, and a comfortable response to ordinary lake or coastal chop rather than chasing a theoretical hull number.
Published draft is 24″ drive up. With the SSX 6 at 26′ 5″ and 8′ 6″ wide, that figure belongs in the ramp and lift discussion because the sterndrive hardware changes how the stern occupies shallow water.
The SSX 6 publishes 5,300 lbs with engine before the full effect of fuel, batteries, gear, water, and trailer. With the SSX 6 at 26′ 5″ and 8′ 6″ wide, a full 65 gallons fuel load can materially change tow and lift weight.
Inspect the SSX 6 from keel to transom in bright light. With the SSX 6 at 26′ 5″ and 8′ 6″ wide, pay special attention to strakes, chines, swim-platform joints, engine or drive mounting areas, and any place where a lift or trailer bunk repeatedly contacts the hull.
The SSX 6 keeps its engine under the aft deck and sends power through the transom. On the SSX 6, that layout is exactly why the stern stays open for swimming, but it also creates a drive-specific maintenance list that does not belong on an outboard page.
The 380-horsepower ceiling gives SSX 6 more reserve than SSX 4 without reaching SSX 8’s 430. Sterndrive service remains central, but the larger boat also puts more load on charging and powered accessories.
Open the SSX 6 engine hatch before the motor starts. During a SSX 6 propulsion check, the compartment should be dry, free of raw-fuel odor, and organized well enough that routine service points can actually be reached.
Blower operation is a basic safety check on the SSX 6. With the 380 HP sterndrive package, the blower should run strongly before startup, the vent path should be clear, and wiring near the engine compartment should not look improvised.
At the SSX 6 engine bay or transom, inspect the transom drive assembly, bellows or sealing hardware, gimbal area, trim cylinders, propellers, skeg, and drive housing. For this SSX 6 drivetrain, corrosion, oil seepage, impact marks, or cracked rubber components can turn a low asking price into an immediate repair bill.
Ask specifically how the SSX 6 was winterized. For a SSX 6 stored in freezing climates, the engine block, raw-water system, drive, freshwater equipment where fitted, and batteries all need model-appropriate storage preparation.
The SSX 6 should shift cleanly into forward and reverse without a violent clunk or long delay. During a SSX 6 propulsion check, under load, the engine should pull smoothly through acceleration and reach the expected operating range without overheating or warning messages.
Sixty-five gallons is a modest increase over the 24-foot boats. The ownership jump comes more from head, water, power step, yacht certification, and hull scale than from range.
The SSX 6 should be range-planned from actual cruise fuel flow, not from tank size alone. With 65 gallons of fuel aboard the SSX 6, propulsion, passenger load, trim, water state, and the amount of time spent accelerating all change consumption.
With 65 gallons of fuel aboard the SSX 6, a full 65 gallons tank adds weight at a specific location in the hull. On the SSX 6, that weight interacts with the sterndrive installation and the normal passenger load, so acceleration and trailer weight should be evaluated realistically.
With 65 gallons of fuel aboard the SSX 6, freshwater is listed as 10 gallons and holding capacity as 3.8 gallons. With 65 gallons of fuel aboard the SSX 6, if the model does not publish those systems, the buyer should not assume another Chaparral’s plumbing package applies here.
Inspect the SSX 6 fill, vent, hoses, sender, separators, and any tank-access points. With 65 gallons of fuel aboard the SSX 6, on an older boat, fuel odor or brittle hose deserves explanation before delivery.
The SSX 6 should prove why its sterndrive layout and 22° hull belong together. On the SSX 6’s 22° running surface, a sea trial should make the model’s handling logic obvious rather than simply confirming that the engine reaches full throttle.
With a normal passenger load aboard, the SSX 6 should climb onto plane without excessive bow rise. On the SSX 6’s 22° running surface, watch whether the driver keeps forward visibility and whether passengers have to relocate to make the boat feel balanced.
The move to 22 degrees of deadrise and 5,300 pounds published weight makes SSX 6 more substantial than either 24-foot sibling while preserving an 8-foot-6-inch beam.
At idle, use the SSX 6 in reverse, make a tight turn, and approach a dock. On the SSX 6’s 22° running surface, the sterndrive arrangement changes where thrust acts and how the stern responds in crosswind.
On the SSX 6’s 22° running surface, at cruising speed, cross ordinary wakes and make a few broad turns. The SSX 6 should track cleanly without steering correction that feels excessive for its size.
Trim response should be progressive. On the SSX 6, the driver should be able to free the hull at cruise without porpoising, propeller ventilation, or a sudden loss of steering confidence.
A full head and Infinity Power Step change how the family uses the day. Guests can stay aboard longer, and swimmers get easier reboarding from a taller platform.
On the SSX 6, that stern arrangement is not a minor styling difference. With passengers aboard the SSX 6, the sterndrive package determines where the engine mass lives, what the family steps around when boarding, and how much mechanical space competes with storage.
The SSX 6 should be tested with adults in the bow, helm, and aft cockpit. Across the 8′ 6″ beam, walk from bow to stern without asking everyone to move and see whether the normal route remains open.
Open the SSX 6 storage with the seats occupied. In normal SSX 6 use, life jackets, dock lines, boards, rods, towels, and a cooler can consume useful space faster than the raw capacity number suggests.
At the SSX 6 helm, check the view over the windshield with the bolster up and down. The SSX 6 should not force the driver to stand simply because adults are sitting forward.
On the SSX 6, use the swim ladder and platform exactly as the family will. With this SSX 6, the sterndrive arrangement should feel like an advantage, not a compromise the buyer notices every time someone gets in the water.
12-inch Simrad NSS4 – This SSX 6 feature should be inspected for condition, operation, and whether it improves the family’s real use rather than merely adding option-sheet value.
This SSX 6 feature should be inspected for condition, operation, and whether it improves the family's real use rather than merely adding option-sheet value.
This SSX 6 feature should be inspected for condition, operation, and whether it improves the family's real use rather than merely adding option-sheet value.
This SSX 6 feature should be inspected for condition, operation, and whether it improves the family's real use rather than merely adding option-sheet value.
This SSX 6 feature should be inspected for condition, operation, and whether it improves the family's real use rather than merely adding option-sheet value.
The 12-inch Simrad, freshwater pump, holding system, powered stern step, optional connectivity package, arch or hardtop, sterndrive blower, and charging system all deserve individual testing.
The SSX 6 electrical check begins with the blower and bilge because both live around an enclosed engine installation. On the SSX 6, the blower should operate strongly, and the bilge should be dry after the sea trial.
Drive trim is another primary system on the SSX 6. During a SSX 6 systems check, run it through its normal range, watch the gauge, and listen for pump strain or uneven movement.
Within the SSX 6 sterndrive installation, battery placement deserves attention because engine starting, blower, bilge, audio, displays, and powered accessories share the same enclosed mechanical environment.
Any aftermarket wiring near the SSX 6 engine bay should be especially clean. At the SSX 6 helm and machinery spaces, unsupported cables, unfused audio amplifiers, or components that block service access create a different risk than a cosmetic dashboard modification.
On a SSX 6 with freshwater or a head, run those systems long enough to expose leaks, then inspect the engine compartment again because plumbing can route through nearby spaces.
The SSX 6 measures 26′ 5″ overall, spans 8′ 6″, and publishes 5,300 lbs with engine before the full loaded condition. On the SSX 6, those numbers need to match the owner’s real storage plan.
The move to 22 degrees of deadrise and 5,300 pounds published weight makes SSX 6 more substantial than either 24-foot sibling while preserving an 8-foot-6-inch beam.
If the SSX 6 stays on a trailer, add 65 gallons of fuel, batteries, gear, water, and trailer weight before comparing the rig with the tow vehicle’s ratings.
The SSX 6 beam is 8′ 6″. The SSX 6’s 8′ 6″ beam stays within conventional road width, making loaded tow weight and trailer length the more likely transport limits.
Bridge or tower clearance should be measured on the actual SSX 6. The SSX 6’s actual stored height should be measured with its installed tower, speakers, antennas, and electronics rather than inferred from a catalog figure.
A lift for the SSX 6 needs capacity for the sterndrive package, fuel, batteries, and the gear normally left aboard. The SSX 6 lift or trailer bunks must support its running surface without loading the sterndrive, transducer, or swim-platform hardware.
SSX 6 values move with 300-to-380-horsepower power, head configuration, EFX II or HTX top, windlass, audio, connectivity, and trailer. Those systems explain the step above SSX 4.
In the SSX 6 market, a permanent price band would age quickly because dealer inventory, model year, engine hours, and option packages change.
In the SSX 6 market, the largest value component is usually propulsion. On the SSX 6, compare engine or drive brand, horsepower, hours, service history, and any steering or joystick equipment before cosmetics.
In the SSX 6 market, the second adjustment should follow the model’s reason for existing. In the SSX 6 market, that means fishing hardware on Ski & Fish, premium head and hardtop equipment on OSX, and luxury electronics or powered stern systems on SSX.
Trailer condition matters most when the SSX 6 is realistically a tow-and-ramp boat. In the SSX 6 market, on marina-oriented models, slip and lift compatibility can matter more than the included trailer.
In the SSX 6 market, electronics should be priced for current usefulness. In the SSX 6 market, a functioning older display can be perfectly serviceable without carrying the replacement value of current hardware.
Illustration only and not an offer of credit.
When calculating a SSX 6 payment, the payment should leave room for the sterndrive-specific service plan, insurance, fuel, and the trailer, lift, or marina setup required by this exact boat.
Illustration only and not an offer of credit. Your actual rate and term depend on credit profile, vessel age, loan amount and ownership structure.
The SSX 6 is the first SSX in this group to add yacht certification, freshwater, a full head, and Infinity Power Step.
Choose SSX 4 when head and freshwater systems are unnecessary. Choose SSX 8 when the family will use the extra hull length, 430 horsepower, 80 gallons of fuel, and larger social deck.
SSX 6 is the right middle luxury boat when all-day comfort matters but conventional-width towing and 26-foot scale are still important.
The SSX 6 should win because its exact propulsion packaging and ownership routine fit the household. In a SSX 6 versus SSX 4 or SSX 8 decision, if the alternative solves the same boating mission with fewer recurring compromises, the buyer should move to the alternative before financing.
Start with the hull identification and exact model year. That matters especially on the SSX 6 because Chaparral has changed power, electronics, upholstery, and model availability over time.
Verify the SSX 6 against its published dimensions: 26′ 5″ LOA, 8′ 6″ beam, 5,300 lbs with engine weight reference, 380 HP maximum horsepower, and 65 gallons fuel capacity.
Before closing on a SSX 6, inspect the hull before the interior. For this SSX 6, chines, keel, transom, swim-platform joints, tower mounts, and trailer contact points can reveal damage that a clean cockpit hides.
On this sterndrive SSX 6, propulsion inspection needs to follow the architecture. The 380-horsepower ceiling gives SSX 6 more reserve than SSX 4 without reaching SSX 8’s 430. Sterndrive service remains central, but the larger boat also puts more load on charging and powered accessories.
Before closing on a SSX 6, review engine hours and service records. For this SSX 6, a vague statement that the boat was “dealer maintained” is less useful than invoices that identify actual drive, cooling, lower-unit, or winterization work.
Before closing on a SSX 6, operate steering, trim, shifting, and throttle under load. The SSX 6 should not produce warnings, vibration, or delayed engagement during a proper sea trial.
The 12-inch Simrad, freshwater pump, holding system, powered stern step, optional connectivity package, arch or hardtop, sterndrive blower, and charging system all deserve individual testing.
Use every feature that defines the SSX 6. A full head and Infinity Power Step change how the family uses the day. Guests can stay aboard longer, and swimmers get easier reboarding from a taller platform.
Before closing on a SSX 6, inspect the trailer if it is part of the transaction. For this SSX 6, tires, brakes, bearings, bunks, winch, coupler, frame, and tongue hardware should be valued separately from the boat.
A final SSX 6 fit check should use the family’s real load. With 8′ 6″ of beam, 380 HP of published maximum power, and 65 gallons of fuel capacity, the boat needs to feel organized with the same adults, coolers, boards, fishing gear, or day bags that will normally come aboard. Empty-showroom space can exaggerate how large a cockpit feels once the weekend gear arrives.
Resale planning on the SSX 6 starts with preserving the systems that define this exact model. Keep service records for the sterndrive package, document any electronics or tower work, and photograph major upgrades when they are installed. A later buyer can understand a well-kept SSX 6 quickly when the paperwork explains why the hull, propulsion, and equipment are still worth more than a neglected comparable.
The SSX 6 ownership worksheet should also include the infrastructure its 26′ 5″ length and 5,300 lbs with engine published weight require. Trailer tires and brakes, lift capacity, storage height, marina access, and local sterndrive service are not side expenses. They determine whether the boat remains easy to use after the excitement of the purchase has worn off.
Send Float Finance the actual SSX 6 listing with model year, sterndrive propulsion, engine hours where available, seller type, and asking price.
The SSX 6 is built around families who need 26-foot luxury-bowrider space and real all-day convenience without moving to the 28- or 30-foot ownership burden. For a SSX 6 buyer, its strongest reason to exist is not just size; it is the way the sterndrive package, deck, and storage profile fit that use.
The SSX 6 publishes 26′ 5″ of overall length and a 8′ 6″ beam. When shopping a SSX 6, those numbers should be checked against the actual trailer, lift, garage, or marina because installed engines and accessories can change the real footprint.
Chaparral publishes 380 HP as the maximum reference for the SSX 6. On this SSX 6, the capacity plate and model-year build remain authoritative on a used boat.
The SSX 6 publishes 65 gallons of fuel capacity. For a used SSX 6, usable range depends on the sterndrive setup, passenger load, trim, cruise speed, and water conditions rather than tank size alone.
The 380-horsepower ceiling gives SSX 6 more reserve than SSX 4 without reaching SSX 8’s 430. Sterndrive service remains central, but the larger boat also puts more load on charging and powered accessories. In a SSX 6 comparison, that drive-specific inspection should happen before a buyer assigns value to upholstery, audio, or cosmetic packages.
Start with SSX 4 or SSX 8. Choose SSX 4 when head and freshwater systems are unnecessary. Choose SSX 8 when the family will use the extra hull length, 430 horsepower, 80 gallons of fuel, and larger social deck.
SSX 6 is the right middle luxury boat when all-day comfort matters but conventional-width towing and 26-foot scale are still important. The sterndrive SSX 6 is strongest when the family values the uninterrupted stern platform enough to accept blower, bellows, gimbal, drive-service, and winterization responsibilities.
Potentially. A used SSX 6 financing decision can depend on model year, value, condition, purchase amount, seller type, and borrower qualifications. In the SSX 6 decision, send Float Finance the exact listing so the loan discussion reflects the actual boat.
Tell us a little bit about yourself and the boat you are looking to finance.
