Call Us : 207-994-5109

Mon – Fri: 8 am to 9 pm & Sat – Sun: 10 am to 8 pm

Scout Boats · XSF Sportfish Series

Scout Boats 240 XSF

The Scout 240 XSF is a 24-foot NuV3 center console with a full transom swim platform, hardtop, forward lounge, baitwell and 100-gallon fuel tank.

Market price
Pricing on request
Estimated monthly
Ask us for a payment
24' 4"
Length overall
100 gal
Fuel capacity

Scout 240 XSF: purpose, fit and ownership tradeoffs

The Scout 240 XSF is a 24-foot NuV3 center console with a full transom swim platform, hardtop, forward lounge, baitwell and 100-gallon fuel tank. It is best suited to coastal anglers who want offshore-capable day range and family seating while staying within an 8-foot-6-inch beam. That mission should stay at the center of the purchase because a premium boat can still be the wrong boat when its main advantages do not match the 240 XSF owner’s normal day.

For the Scout 240 XSF, reference dimensions are 24′ 4″ overall with 8′ 6″ of beam, 100 gal of fuel and a maximum horsepower rating of 300 HP. Approximate draft is 19.5″. In the 240 XSF ownership decision, those numbers affect launch access, slip size, wet weight and how much boat the driver has to manage at low speed.

The 240 carries more equipment and fuel than the smaller XSF boats, so towing and maintenance rise even though the beam remains trailer-friendly.

The 240 XSF should feel like a fishing boat before it feels like a lifestyle product. When comparing the 240 XSF, walk a rod around the console, open the livewell, reach the bow and stern storage, then put the family in the normal seats. For the Scout 240 XSF, that reveals whether the center-console layout really supports both sides of the purchase.

scout boats 240 xsf inlet idle 13

Scout Boats 240 XSF Specifications

Published factory figures. Confirm every dimension against the individual boat before you commit.

Dimensions and build
Length Overall
24' 4"
Beam
8' 6"
Draft
19.5"
Dry Weight Reference
3,655 lb
Transom Deadrise
20°
Propulsion
Maximum Horsepower
300 HP
Fuel and range
Fuel Capacity
100 gal
Fresh Water
15 gal
scout boats 240 xsf hero exterior underway 01

Hull, dimensions and running design

The 240 XSF combines 20° of transom deadrise with 8′ 6″ of beam. That geometry should be judged in the 240 XSF owner’s actual water. On the 240 XSF hull, run across wakes, quarter into chop and make a low-speed turn with passengers aboard rather than accepting a single straight-line pass as proof of ride quality.

Published or reference dry weight is about 3,655 lb dry before engines or operating load. During a 240 XSF hull inspection, add fuel, batteries, water where fitted, engines when the dry figure excludes them, safety gear and the normal crew before using the number for a trailer, lift or haul-out decision.

Inspect the 240 XSF before launch. For the 240 XSF’s running profile, sight along the keel, chines and running surface for impact or repair work, then check through-hulls, transom hardware, trim or ride-control equipment and the support points used by a trailer or lift. On the 240 XSF hull, cosmetic polish should not hide structural or rigging questions.

During the sea trial, run the 240 XSF at the cruise speed the owner expects to use most often. Watch how the bow settles, how much trim correction the driver needs and whether the 240 XSF remains predictable as passengers move. During a 240 XSF hull inspection, ride quality is a loaded-boat question, not a catalog number.

Outboard power, rigging and maneuvering

The Scout 240 XSF is an outboard-powered platform. On the 240 XSF propulsion package, that keeps major propulsion components outside the hull and makes engine access straightforward, but engine count, gearcases, steering, propellers and digital controls can still represent a large share of the annual maintenance budget.

Ask to see the 240 XSF start cold. Compare idle quality, charging voltage, temperature and steering response before the 240 XSF leaves the dock. For a used 240 XSF, on multi-engine examples, engines should carry load evenly and respond consistently to throttle and steering commands.

Run the 240 XSF through idle, normal cruise, acceleration and a hot restart. During the 240 XSF engine test, a short top-speed burst does not replace the operating conditions that reveal weak batteries, cooling issues, steering faults or propeller vibration.

On the 240 XSF propulsion package, after the sea trial, inspect lower units, skegs, propellers, steering hardware, engine mounts and accessible rigging. Match engine serial numbers and service records to the exact 240 XSF being purchased. For a used 240 XSF, confirm current factory availability and exact model-year equipment before purchase.

scout boats 240 xsf helm detail 08
scout boats 240 xsf front quarter running 02

Fuel capacity, range planning and operating load

The 240 XSF carries 100 gal of fuel. Use the exact engine display to record fuel flow at a comfortable cruise, then build range from the route the 240 XSF owner actually runs with a reserve. For the 240 XSF’s fuel plan, tank capacity by itself is not a mileage promise.

A full 100 gal fuel load adds meaningful weight to the 240 XSF. On a loaded 240 XSF, add that fuel to engines, batteries, freshwater where fitted, people, tackle and day gear before deciding whether a lift, trailer or rack-storage plan has enough capacity.

When budgeting a 240 XSF, fuel-system inspection should include fills, vents, filters, accessible lines and any persistent odor. On a 240 XSF that has spent long periods inactive, stale fuel can create drivability problems that look like engine faults.

For the 240 XSF’s fuel plan, for ownership budgeting, separate local fishing days from long offshore or cruising runs. The 240 XSF does not burn the same amount of fuel in every mission, so annual cost should be built from the owner’s expected hours and routes rather than one performance-test number.

How to evaluate the Scout 240 XSF underway

Sea-trial the 240 XSF the way it will be owned: coastal fishing, family day boating and trailer-based ownership. During a 240 XSF sea trial, start at idle, establish a normal cruise, cross wakes from several angles and finish with a real docking or ramp exercise.

On the 240 XSF underway, visibility and driver workload matter as much as speed. When testing the 240 XSF, the helm should let the operator see forward through acceleration, hold a comfortable cruise without constant trim correction and reach steering, throttle and electronics without awkward movement.

During a 240 XSF sea trial, passenger comfort should be checked from more than the helm. Put people in the bow, aft seating and any companion lounge while the 240 XSF crosses realistic chop. On the 240 XSF underway, a premium layout should protect the whole crew, not just the driver.

Use the 215 XSF as the first control for the 240 XSF. If the 215 XSF handles the same crew and water with less beam, fuel or system complexity, the 240 XSF should have a clear reason to stay on the short list. When testing the 240 XSF, that reason might be fishing space, weather protection, cabin comfort or propulsion capacity, but it should be used repeatedly.

scout boats 240 xsf fishing rods holders 20
scout boats 240 xsf family fishing lifestyle 09

Deck layout, fishing space and family usability

Load the 240 XSF for a realistic day before judging the deck. Stow rods, tackle, a cooler, dock lines, safety gear

and the swim or tow gear the family actually uses. Then walk the 240 XSF from bow to stern with the normal crew

aboard. The layout should preserve safe movement, access to the water and the working space central to this model’s

mission after the boat is fully occupied.

Three 240 XSF details deserve focused inspection: center-console circulation, elite leaning post and forward seating. Review those details with the cockpit occupied and the normal gear aboard. A useful premium feature should reduce work for the 240 XSF crew rather than create a new sequence of seats, hatches or switches every time the activity changes.

On the 240 XSF deck, at the helm, sit and stand. With the 240 XSF loaded for the day, check sightlines around the windshield or console, throttle reach, seat support and the passenger handholds nearest the driver. On the 240 XSF, ergonomics matter because fishing and family days often mean hours underway rather than one short run.

When using the 240 XSF cockpit, finish the deck test at the stern. On the 240 XSF deck, outboards, boarding access, livewell hardware and aft seating all compete for the same area. The 240 XSF is well integrated only when swimmers, anglers and the engine-service plan can coexist without constant reconfiguration.

Eight Scout 240 XSF features worth understanding

Center-console circulation

The 240 XSF lets anglers move around the helm rather than through a dual-console windshield.

Bow casting space

Forward deck area keeps the 240 XSF useful for active fishing.

Livewell or baitwell

Live-bait capacity is integrated into the 240 XSF fishing layout.

Elite leaning post

Rod holders, cooler and helm support are consolidated at the 240 XSF leaning post.

Outboard propulsion

The 240 XSF uses simple external propulsion appropriate to a trailerable fishing boat.

Full transom swim platform

The 240 XSF uses a longer outboard-shaft arrangement to create a level transom-access area.

Forward seating

Scout adds passenger comfort without turning the 240 XSF into a dual console.

Optional watersports hardware

Tow and seating options can broaden the 240 XSF beyond fishing when the family needs it.

Electronics, pumps, electrical and comfort systems

The systems inspection on a Scout 240 XSF should concentrate on center-console circulation, baitwell condition, rod storage, bow casting space, swim access and single-outboard service history. These systems are part of the 240 XSF’s real value and should be tested under use, not just switched on for a moment.

On the 240 XSF, test the systems that create its identity under simultaneous load. On the 240 XSF’s systems, run helm electronics, pumps, audio, refrigeration or climate where fitted, and any powered doors or seating. During a 240 XSF systems check, watch voltage, pump cycling and control responsiveness for long enough to expose an intermittent fault.

For the 240 XSF’s electrical and plumbing load, check batteries, charging, digital switching and networked electronics together. On the 240 XSF’s systems, modern marine systems can look healthy with one display running and behave very differently once pumps, stereo, refrigeration, climate or powered deck hardware are operating at the same time.

During a 240 XSF systems check, after the sea trial, reopen the bilge and utility areas. New water, an unexpectedly cycling pump, a warm connection or a fresh alarm on the 240 XSF deserves investigation before the buyer treats the boat as ready.

scout boats 240 xsf elevated exterior 05
scout boats 240 xsf dockside profile 04

Cabin, overnight use and dockage planning

The Scout 240 XSF is best understood as a day-boat layout rather than a dedicated overnight cabin. For the 240 XSF’s storage plan, that distinction matters because a buyer should not pay for cabin capability they will never use or expect a day boat to become a comfortable cruiser simply because a head or console compartment is available.

When planning to keep a 240 XSF, storage planning begins with 24′ 4″ overall length and 8′ 6″ of beam. Confirm the actual trailer, rack, lift or slip rather than assuming a nearby boat will fit because the 240 XSF numbers are close.

If the 240 XSF has freshwater, sanitation, refrigeration, air conditioning or shore power, run those systems and inspect for leaks, pump cycling and moisture. On the 240 XSF’s overnight or dockage plan, if it is day-boat oriented, focus instead on dry storage, shade and whether fishing gear can stay aboard without occupying passenger seating.

Typical Scout 240 XSF pricing

When valuing a 240 XSF, actual value can move with model year, propulsion package, hours, electronics, stabilization, lithium equipment, hardtop options, upholstery and overall condition.

For a pre-owned 240 XSF, options should be valued by function. In the 240 XSF price comparison, a working Seakeeper, lithium system, powered seat, beach platform, livewell, joystick or electronics suite adds utility. When valuing a 240 XSF, the same option in failed condition becomes a repair line even if it was expensive when new.

Propulsion history has outsized value on the 240 XSF. For a pre-owned 240 XSF, complete engine service records, clean lower units and healthy steering can justify more than cosmetic upgrades because deferred outboard work multiplies quickly on multi-engine boats.

In the 240 XSF price comparison, keep the first-year correction budget separate from asking price. When valuing a 240 XSF, batteries, pumps, upholstery, electronics, props, steering, canvas and climate equipment can erase an attractive discount if several systems are due together.

Market price band
Pricing on request
Estimated monthly
Ask us for a payment

Illustration only and not an offer of credit.

Estimate a Scout 240 XSF payment

In the 240 XSF payment estimate, add the storage, insurance, fuel and service costs created by a 24′ 4″ boat with 100 gal of fuel capacity.

Estimated monthly $1,265 Get prequalified

Illustration only and not an offer of credit. Your actual rate and term depend on credit profile, vessel age, loan amount and ownership structure.

Compare the Scout 240 XSF with nearby Scout models

In the 240 XSF cross-shop, the 215 XSF is the first useful cross-shop because it changes size, layout or series mission without leaving Scout. It measures 21′ 6″ with 8′ 6″ of beam and carries 82 gal of fuel, compared with 24′ 4″, 8′ 6″ and 100 gal on the 240 XSF. When comparing the 240 XSF, the point is not to crown a larger boat. It is to see which platform solves the 240 XSF owner’s recurring use with the least unnecessary complexity. For the 240 XSF short list, the 240 Dorado is the first useful cross-shop because it changes size, layout or series mission without leaving Scout. It measures 24′ 4″ with 8′ 6″ of beam and carries 100 gal of fuel, compared with 24′ 4″, 8′ 6″ and 100 gal on the 240 XSF. In the 240 XSF cross-shop, the point is not to crown a larger boat. It is to see which platform solves the 240 XSF owner’s recurring use with the least unnecessary complexity.

The Scout 240 XSF belongs on the short list when its own mission still makes sense after those comparisons: coastal anglers who want offshore-capable day range and family seating while staying within an 8-foot-6-inch beam. When comparing the 240 XSF, the purchase should be based on repeated utility, not simply the largest hull or highest horsepower the budget can reach.

scout boats 240 xsf dock approach 19
scout boats 240 xsf console windshield detail 16

Buying a new or pre-owned Scout 240 XSF

Confirm the exact Scout 240 XSF before negotiating. Before buying a 240 XSF, record the hull identification, model year, engine serial numbers and high-value factory or aftermarket equipment that is physically installed. In a 240 XSF pre-purchase review, remember that Scout’s equipment and availability can change over time, so the actual boat is the source of truth for the transaction.

Ask how the 240 XSF was stored, where it was used and whether engine and onboard-system service stayed on schedule. For the exact 240 XSF being considered, a coherent service history is easier to value than low hours with long inactive periods and no maintenance record.

Inspect the 240 XSF with extra attention to center-console circulation, baitwell condition, rod storage, bow casting space, swim access and single-outboard service history. Before buying a 240 XSF, open accessible lockers and service panels. In a 240 XSF pre-purchase review, water staining, corrosion trails, improvised wiring or pumps that never stop cycling can reveal a more useful ownership story than a fresh detail.

Run the 240 XSF until propulsion and major systems are warm, then inspect the bilge, engines and utility spaces again. For the exact 240 XSF being considered, heat and vibration often reveal issues that a cold dockside inspection does not.

Before buying a 240 XSF, verify ownership documents, lien payoff where applicable, serial numbers and transaction structure independently of the mechanical inspection. In a 240 XSF pre-purchase review, a sound boat and clean paperwork are separate requirements.

The 240 XSF remains simpler than Scout’s LXF models, which is part of the appeal. the 240 XSF owner should preserve that advantage by keeping the engine, pumps, steering and electrical additions clean rather than turning a straightforward center console into a wiring project.

Research the boat before structuring the purchase

Secure a Scout 240 XSF with the whole purchase in view

Once the Scout 240 XSF has passed the fit, condition and sea-trial checks, evaluate financing for the actual boat. For the 240 XSF purchase, float Finance can help consumers pursue financing for eligible dealer, brokerage and private-party marine purchases, subject to borrower, collateral and transaction requirements.

Scout 240 XSF buyer questions

The Scout 240 XSF is strongest for coastal anglers who want offshore-capable day range and family seating while staying within an 8-foot-6-inch beam. Its main compromise is The 240 carries more equipment and fuel than the smaller XSF boats, so towing and maintenance rise even though the beam remains trailer-friendly. For the Scout 240 XSF, if that compromise shows up on most trips, compare another Scout before applying.

The reference figures are 24′ 4″ overall length, 8′ 6″ beam, 100 gal fuel capacity, 300 HP maximum horsepower and approximately 19.5″ draft. Dry weight is 3,655 lb and transom deadrise is 20°. On the exact 240 XSF, verify the exact model year and installed equipment before purchase.

The Scout 240 XSF carries 100 gal of fuel. Actual range depends on engine package, rpm, sea state, load and bottom condition, so use real fuel-flow data from the exact 240 XSF rather than a universal range claim.

When researching the 240 XSF, the current reference specification used here lists up to 300 HP. The exact engine count and package can vary by model and model year, so confirm serial numbers, rigging, propellers and service history on the 240 XSF being purchased.

The Scout 240 XSF is best described as a day-boat layout rather than a dedicated overnight cabin. For the Scout 240 XSF, buyers planning regular nights aboard should test berth size, storage, ventilation, climate, freshwater and head systems with the actual sleeping party.

On the exact 240 XSF, start with cold propulsion behavior and service records, then focus on center-console circulation, baitwell condition, rod storage, bow casting space, swim access and single-outboard service history. Operate center-console circulation and elite leaning post, sea-trial the boat until systems are warm, and inspect the bilge or machinery areas again after the run.

The 215 XSF is a useful comparison because it changes the size or mission without leaving the Scout family. When researching the 240 XSF, put the same crew, storage plan, fishing gear and water conditions against both boats. For the Scout 240 XSF, choose the one whose layout and ownership scale solve the normal trip.

Float Finance can help consumers pursue financing for eligible Scout 240 XSF purchases through dealers, brokerages and private parties, subject to borrower, collateral and transaction requirements.

Find and finance the right Scout 240 XSF

Let's Make This Easy

Tell us a little bit about yourself and the boat you are looking to finance.

Skip to content